CUT-TO-LENGTH LINE
LCT 1300/1600.2 ESQUADROS®
PROCESS COILS FROM 0,45 MM ATÉ 2,65 MM THICKNESS
CUT-TO-LENGTH LINE - LCT 1300/1600.2 ESQUADROS®
TECHNICAL INFO
| EQUIPMENT: | 1300/1600.2 CUT-TO-LENGTH LINE |
| DECOILER CAPACITY(ton): | 15 TONS |
| MAXIMUM COIL WIDTH: | 1.300/1.600 mm |
| MAXIMUM SHEET THICKNESS: | 2,65 mm |
| MINIMUM SHEET THICKNESS: | 0,45 mm |
| MAXIMUM OUTFLOW LIMIT (L.E): | 240 N/mm2 |
| MAXIMUM RESISTANCE LIMIT (L.R): | 360 N/mm2 |
| SPEED: | 25 m/min |
| ELECTRONIC POSITIONING SYSTEM: | Closed loop |
| POSITIONING ACCURACY FOR CUTTING THE METAL SHEET : | ±0,50 mm |
| VOLTAGE/ FREQUENCY/ WORK CYCLE: | 380V/ 60Hz/ 8h |
| LINE PAINTING: | EPOXY GRAY RAL 7035 - YELLOW 5Y8/12 |
PRO DECOILER - 15 TON
The decoiler has a robust, welded steel structure and counter-supporting shaft support. The mandrel is made up of three paddles which guarantee perfect coil fixation. Roller bearings. By turning a single nut on the main shaft, the mandrel expands in diameter and adjusts to the internal diameter of the coil, ensuring a centralized fixation. The machine is epoxy painted in standard gray ral 7035 and yellow 5Y8/12.
| Load capacity: | 15.000 kgf |
| Maximum external diameter of the coil: | 1.500 mm |
| Coil inside diameter: | 20" |
| Drive: | Dragging |
| Braking: | Manual regulation |
REWINDING SET - CR4
REWINDING SET - CR3
REWINDING SET - CR2
REWINDING SET - CR1
REWINDING SET ESQUADROS
The Unwinder has a robust steel structure, welded, and a support for the shaft counter-support. The mandrel consists of three blades that ensure perfect coil fixation. Bearing-mounted supports. By turning a single nut on the main shaft, the mandrel expands its diameter and adjusts to the inner diameter of the coil, ensuring centralized fixation. The machine is coated with epoxy paint in the standard gray color RAL 7035 and yellow 5Y8/12.
